Strain rate influence on fracture development in experimental ductile multilayers

Enrique Gomez-Rivas, Albert Griera

Producción científica: Contribución a una revistaArtículoInvestigaciónrevisión exhaustiva

10 Citas (Scopus)

Resumen

The far-field strain rate is a crucial parameter that controls the transition between brittle and ductile deformation. We have used analogue experiments to study the strain rate influence on the development of brittle fractures in a ductile composite material. Plasticine multilayer models were deformed under coaxial boundary conditions at three different strain rates to analyse the transition from non-localised deformation to the development of a brittle fracture network that accommodates part of the deformation. The results show that tension cracks and voids are the first macroscopic structures that nucleate after an early stage of ductile deformation. Coalescence and collapse of these structures lead to the development of brittle shear fractures. The evolution of fracture orientations, lengths and displacements was systematically analysed. The ratio of the accumulated fracture displacement vs. fracture length (dmax/L) depends not only on the total deformation, but also on the strain rate at which the system is deformed. The accumulated displacement with respect to fracture length increases with strain rate. © 2011 Elsevier B.V.
Idioma originalInglés
Páginas (desde-hasta)351-363
PublicaciónTectonophysics
Volumen502
N.º3-4
DOI
EstadoPublicada - 20 abr 2011

Huella

Profundice en los temas de investigación de 'Strain rate influence on fracture development in experimental ductile multilayers'. En conjunto forman una huella única.

Citar esto