TY - JOUR
T1 - Cerium oxide nanoparticles anchored onto graphene oxide for the removal of heavy metal ions dissolved in water
AU - Rodríguez, Ada Rebeca Contreras
AU - McCarthy, Joseph E.
AU - Alonso, Amanda
AU - Moral-Vico, J.
AU - Font, Xavier
AU - Gun’ko, Yurii K.
AU - Sánchez, Antoni
PY - 2018/8/1
Y1 - 2018/8/1
N2 - © 2018 Desalination Publications. All rights reserved. The aim of this study is to investigate the possibility of using cerium oxide (CeO2) nanoparticles (NPs) attached to reduced graphene oxide (rGO) as an alternative adsorbent for cadmium (II), lead (II) and chromium (VI) removal from aqueous solution. The new nanomaterials (CeO2/rGO) were obtained following two different strategies, in-situ growth and self-assembly approach. The adsorption capacities for each heavy metal were investigated at a fixed pH (5.56), a range concentration of heavy metal from 5 to 250 mg/L and a fixed concentration of 0.05 mg of CeO2/rGO nanomaterial. The experimental data were fitted using the Langmuir, Freundlich and Temkin isotherms models. The experimental data of each nanomaterial for the removal of Pb(II) were approximated best by the Langmuir model, while for the removal of Cd(II) Langmuir and Freundlich showed good regression coefficients. The study showed that CeO2 NPs attached to rGO could be used as an efficient adsorbent material for the adsorption of cadmium and lead from aqueous solution. The nanomaterial obtained by in-situ growth registered the highest adsorption capacity for the removal of lead (95.75 mg Pb2+/g CeO2/rGO-HMT), while in the case of cadmium the highest adsorption was obtained with the nanomaterial synthesized following the self-assembly approach (31.26 mg Cd2+/g CeO2/rGO-AM).
AB - © 2018 Desalination Publications. All rights reserved. The aim of this study is to investigate the possibility of using cerium oxide (CeO2) nanoparticles (NPs) attached to reduced graphene oxide (rGO) as an alternative adsorbent for cadmium (II), lead (II) and chromium (VI) removal from aqueous solution. The new nanomaterials (CeO2/rGO) were obtained following two different strategies, in-situ growth and self-assembly approach. The adsorption capacities for each heavy metal were investigated at a fixed pH (5.56), a range concentration of heavy metal from 5 to 250 mg/L and a fixed concentration of 0.05 mg of CeO2/rGO nanomaterial. The experimental data were fitted using the Langmuir, Freundlich and Temkin isotherms models. The experimental data of each nanomaterial for the removal of Pb(II) were approximated best by the Langmuir model, while for the removal of Cd(II) Langmuir and Freundlich showed good regression coefficients. The study showed that CeO2 NPs attached to rGO could be used as an efficient adsorbent material for the adsorption of cadmium and lead from aqueous solution. The nanomaterial obtained by in-situ growth registered the highest adsorption capacity for the removal of lead (95.75 mg Pb2+/g CeO2/rGO-HMT), while in the case of cadmium the highest adsorption was obtained with the nanomaterial synthesized following the self-assembly approach (31.26 mg Cd2+/g CeO2/rGO-AM).
KW - Cerium oxide nanoparticles
KW - Graphene oxide
KW - Heavy metals removal
KW - In-situ growth
KW - Nanocomposite
KW - Self-assembly
U2 - 10.5004/dwt.2018.22735
DO - 10.5004/dwt.2018.22735
M3 - Article
SN - 1944-3994
VL - 124
SP - 134
EP - 145
JO - Desalination and Water Treatment
JF - Desalination and Water Treatment
ER -