TY - JOUR
T1 - Fieldlike and antidamping spin-orbit torques in as-grown and annealed Ta/CoFeB/MgO layers
AU - Avci, Can Onur
AU - Garello, Kevin
AU - Nistor, Corneliu
AU - Godey, Sylvie.
AU - Ballesteros, Belén
AU - Mugarza, Aitor
AU - Barla, Alessandro
AU - Valvidares, Manuel
AU - Pellegrin, Eric.
AU - Ghosh, Abhijit
AU - Miron, Ioan Mihai
AU - Boulle, Olivier
AU - Auffret, Stéphane
AU - Gaudin, Gilles
AU - Gambardella, Pietro
PY - 2014
Y1 - 2014
N2 - We present a comprehensive study of the current-induced spin-orbit torques in perpendicularly magnetized Ta/CoFeB/MgO layers. The samples were annealed in steps up to 300 °C and characterized using x-ray-absorption spectroscopy, transmission electron microscopy, resistivity, and Hall effect measurements. By performing adiabatic harmonic Hall voltage measurements, we show that the transverse (fieldlike) and longitudinal (antidampinglike) spin-orbit torques are composed of constant and magnetization-dependent contributions, both of which vary strongly with annealing. Such variations correlate with changes of the saturation magnetization and magnetic anisotropy and are assigned to chemical and structural modifications of the layers. The relative variation of the constant and anisotropic torque terms as a function of annealing temperature is opposite for the fieldlike and antidamping torques. Measurements of the switching probability using sub-μs current pulses show that the critical current increases with the magnetic anisotropy of the layers, whereas the switching efficiency, measured as the ratio of magnetic anisotropy energy and pulse energy, decreases. The optimal annealing temperature to achieve maximum magnetic anisotropy, saturation magnetization, and switching efficiency is determined to be between 240 and 270°C.
AB - We present a comprehensive study of the current-induced spin-orbit torques in perpendicularly magnetized Ta/CoFeB/MgO layers. The samples were annealed in steps up to 300 °C and characterized using x-ray-absorption spectroscopy, transmission electron microscopy, resistivity, and Hall effect measurements. By performing adiabatic harmonic Hall voltage measurements, we show that the transverse (fieldlike) and longitudinal (antidampinglike) spin-orbit torques are composed of constant and magnetization-dependent contributions, both of which vary strongly with annealing. Such variations correlate with changes of the saturation magnetization and magnetic anisotropy and are assigned to chemical and structural modifications of the layers. The relative variation of the constant and anisotropic torque terms as a function of annealing temperature is opposite for the fieldlike and antidamping torques. Measurements of the switching probability using sub-μs current pulses show that the critical current increases with the magnetic anisotropy of the layers, whereas the switching efficiency, measured as the ratio of magnetic anisotropy energy and pulse energy, decreases. The optimal annealing temperature to achieve maximum magnetic anisotropy, saturation magnetization, and switching efficiency is determined to be between 240 and 270°C.
UR - https://www.scopus.com/pages/publications/84903542232
U2 - 10.1103/PhysRevB.89.214419
DO - 10.1103/PhysRevB.89.214419
M3 - Article
SN - 1098-0121
VL - 89
JO - Physical Review B - Condensed Matter and Materials Physics
JF - Physical Review B - Condensed Matter and Materials Physics
IS - 21
ER -