Biological nitrogen removal of high-strength ammonium industrial wastewater with two-sludge system

    Producció científica: Contribució a una revistaArticleRecercaAvaluat per experts

    163 Cites (Scopus)

    Resum

    The biological nitrogen removal (BNR) process is the most common method for removing low quantities of ammonium from wastewater, but this is not the usual treatment for high-strength ammonium wastewater. The capacity to biologically remove the nitrogen content of a real industrial wastewater with a concentration of 5000mg N-NH4+ L-1 is demonstrated in this work. The experimental system used is based on a two-sludge system, with a nitrifying activated sludge and a denitrifying activated sludge. This system treated real industrial wastewater for 450 days, and during this period, it showed the capacity for oxidizing all the ammonium at average nitrification rates between 0.11 and 0.18g N-NH4+gVSS-1d-1. Two key process parameters were evaluated: the maximum nitrification rate (MNR) and the maximum denitrification rate (MDR). MNR was determined in continuous operation at three different temperatures: 15°C, 20°C and 25°C, obtaining values of 0.10, 0.21 and 0.37g N-NH4+g VSS-1d-1, respectively. Complete denitrification was achieved using two different industrial carbon sources, one containing mainly ethanol and the other one methanol. The MDR reached with ethanol (0.64g N-NOx-g VSS-1d-1) was about 6 times higher than the MDR reached with methanol (0.11g N-NOx-g VSS-1d -1). © 2003 Elsevier Ltd. All rights reserved.
    Idioma originalEnglish
    Pàgines (de-a)4211-4221
    RevistaWater Research
    Volum37
    Número17
    DOIs
    Estat de la publicacióPublicada - 1 de gen. 2003

    Fingerprint

    Navegar pels temes de recerca de 'Biological nitrogen removal of high-strength ammonium industrial wastewater with two-sludge system'. Junts formen un fingerprint únic.

    Com citar-ho